INST
ALLA
TION
UT-MT-0812_2.0_24-01-2023 (EN)
Use and Maintenance Manual
LERA
28
Verification of the pointing of the fixture on pole head
After each pointing operation, check that the fixture setting is correct.
Act on the lever to lock the rotation of the goniometer and connect the nylon string. Lift the pole to the working
position.
When the pole is in position, act on the string to temporarily unlock the goniometer and detect the actual angle.
Wait for the goniometer to settle then release the string to lock the goniometer again.
Proceed to lower the pole. Read the measured value and check that it corresponds to the project angle. If necessary,
make required adjustments and repeat the verification.
