INST
ALLA
TION
UT-MT-0812_2.0_24-01-2023 (EN)
Use and Maintenance Manual
LERA
20
3.5
Installation of the light fixture directly on the pole (configuration C)
Store the device in its original packaging until the time of installation.
Proceed assembling the fixture and check the supply features before installing the fixture.
Pay particular attention to the proper positioning of the fixture on the base.
The fixtures installed on the pole (C configuration) are supplied without pole and without any frangible coupling.
Use the fixture only in combination with compatible supports.
Before carrying out any intervention on the device, cut off all external power sources and
place appropriate work-in-progress warnings on the systems.
Wait for the discharging time (at least 5 min) and check using appropriate instruments that
there are no residual energies before accessing the electrical equipment.
Insert inside the poles the power supply cable and the ground conductor, and insert the fixture on the pole (Ø 60 mm)
of height in accordance with the project: the focus of the fixture is positioned 143 mm above the support system.
Tighten uniformly the screws present on the body of the fixture until stopping the fixture on the pole (without tightening)
Install an adequate support system.
