INST
ALLA
TION
UT-MT-0812_2.0_24-01-2023 (EN)
Use and Maintenance Manual
LERA
23
3.7
Fixture pointing on fixed support
Make an initial pointing of the fixture by hand. Rotate the body of the fixture until orienting the fixture in the desired
direction.
The positioning of the light elements varies depending on the use.
Ensure that the device is used correctly for its intended purpose, in accordance with the
installation project and the regulations in force.
Install the pointing tool on the body of the fixture and proceed to adjust the light beam.
Before proceeding, make sure that both angle settings are reset.
Use pointing references placed frontally or laterally, and adjust the pointing tool accordingly.
The pointing tool can rotate 360° in 90° steps.
