Oceaneering C-Nav3050, Manual

Page: 22 / 42

How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 22 of 42 5/5/2017
Direct Ethernet Connection
1. Connect to the C-Nav3050® on any available port, such as USB or a
serial COM port. For more information on this please refer to the Section 2
- Serial Connection section (Page 8 ) or Section 3 - USB Connection (Page
13 ).
2. Once connected, navigate to the following menu:
[Device / Ethernet Configuration]
For a standard configuration use the factory default IP address and Netmask as
per below:
IP Address :
“192.168.0.2”
Netmask :
“255.255.255.0”