How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3
Page 29 of 42
5/5/2017
To configure the virtual Ethernet port, you will need to know the remote address
of the computer you wish to connect to. This can be found using Command
Prompt / CMD
7. O
pen a command prompt window and type ‘ipconfig’ all adapter settings
are displayed. You can find your IP from the active adapter as shown
below:
Please note
:
It is recommended to have the receiver set as a static IP address so that if
there is a loss of power for a prolonged period, it is not reassigned a different
automatic IP address resulting in a loss of communications with connected
devices.
