How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3
Page 10 of 42
5/5/2017
Start Menu / Control Panel / Device Manager
5. Expand
Ports (COM & LPT)
will show the available serial ports on the PC.
Each new C-Nav3050® connected to C-Setup / C-Monitor will have a different
COM port associated with it.
If a USB-to-serial adapter is used in this connection, the same procedures above
still apply. However, it will be important to determine which COM port has been
assigned to the device in the Device Manager settings as it may be outside of the
traditional range of assignments for the communications ports.
6. If it is the first time connecting the C-Nav3050® to C-Setup / C-Monitor,
the default settings in the receiver should enable a successful connection
to the controller. Pressing
Open
should establish this.
