How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3
Page 8 of 42
5/5/2017
Section 2 - Serial Connection
The C-Nav3050® receiver can be connected directly to an available COM port on
a PC via the DB9 serial interface of either of the two cables shown below:
Y-Cable, Positronic 9-Pin Male to RJ45 & DB9S/1PPS)
(P/N 94-310272-3006LFB)
or
Y-Cable Positronic 9-Pin to USB & DB9S (232/422)
(P/N NAV94-310273-3006LF).
Please follow the stickered guidelines with regards to which cable is appropriate
for each COM port on the receiver.
Once these cables are attached to the C-Nav3050® unit, it is possible to choose
either cable to control the unit via an available COM port on the PC.
Open the C-Setup / C-Monitor software by double clicking on its icon on the
desktop. Now add the device in C-Setup/C-Monitor. This can be done following
the below procedure:
1. Click
New
or
[File / New]
in C-Setup / C-Monitor.
2. Select a
Device Type
of “
C-Nav 3050
.”
The
Device Name
and
Device
Color
are not crucial to successful connection, but provide a means of
identification when multiple devices are added. Press
Add
when finished.
