Oce XDL, Reference Manual

Page: 55 / 255

Input Processing Summary of VOLUME Command Parameters
A29247-X4-X-8-7672
47
Parameter Definition(s) Offline Online DJDE
BMULT=
value
value
Specifies a multiplication factor that you apply to
the block length that you extract from the data
block to determine the true block length. The val-
ue is an integer and can range from 1 (default) to
15
The default is 1.
Y N N
CODE=
keyword
keyword
Specifies a specific, standard, system-defined
code translation table for data blocks. The avail-
able options are:
ASCII
EBCDIC
NONE
USER
USER refers to the single unlabeled CODE com-
mand defined within the JDE or JDL.
If you specify more than one CODE parameter,
use identifiers so that they can be referenced in
your JSL. You must then specify the variable
identifier (id) to correspond to the identifier label
assigned to the defining CODE command.
The default is EBCDIC.
Y Y N
CODE=
id
id
Specifies a variable identifier you use in the
CODE command to refer to a specific user-de-
fined code translation table. The identifier id is
required when multiple CODE commands are
contained within the JDL.
CODE=
NONE NONE
Specifies that data is not to be translated by
input processing. Selecting CODE=NONE
switch on the metacode interpreter. All code
between X'00' and X'0F' are interpreted as con-
trol codes.