Oce XDL, Reference Manual

Page: 93 / 255

Print Processing Summary of OUTPUT Command Parameters
A29247-X4-X-8-7672
85
BFORM=
NONE NONE
Specifies that no form is to be added to the associat-
ed report page of variable data. A init parameter
specifies the beginning ply (pass) number to which a
specified form applies. This defaults to the first or
next copy.
The default is NONE.
COLLATE=
YES YES
Specifies that the output pages are collated
The default is YES. Y Y Y
COLLATE=
NO NO
Specifies that the output is not collated.
COPIES=
number
number
An integer value with range 0 to 32767. For the cop-
ies DJDE parameter, a value of 0 may be specified
for the DJDE COPIES parameter, in which case no
copies are printed. The copies parameter on the
START command allows an operator to override this
parameter when initiating a print job.
The default is 1.
Y Y Y
COVER=
NONE NONE
Specifies that no cover pages are to be printed.
The default is NONE. Y Y N
COVER=
FRONT FRONT
Specifies that a cover page is to be printed at the
front of each copy and is the first page of the copy.
COVER=
(FRONT, SEP) SEP
Specifies that each front cover does not have any
data printed on it; also, no report data is printed on
the back of a SEP cover.
The system generates an additional blank page be-
tween reports.
COVER=
BACK BACK
Specifies that a cover page is to be printed at the end
of each copy. No report data is printed on back cov-
ers.
COVER=
BOTH BOTH
Specifies that both front and back cover pages are to
be printed and the front of each copy is the first page
of the copy.
Parameter Definition(s) Offline Online DJDE