background image

Summary of MESSAGE Command Parameters

Print Processing

80

A29247-X4-X-8-7672

3.7 Summary of MESSAGE Command Parameters

The MESSAGE and ROUTE commands permit the user to inform the operator of special 
conditions. The MESSAGE command displays user-defined text to the operator.

ITEXT

This parameter specifies a text message to be output to the operator dur-
ing input processing.

OTEXT

This parameter specifies a text message to be output to the operator dur-
ing job printing.

Parameter

Definition(s)

Offline

Online

DJDE

ITEXT=
NONE

NONE
Specifies that no text message is output to the oper-
ator during input processing.
The default is NONE.

Y

Y

Y

ITEXT=

sc

sc

Specifies a text message of up to 80 characters.

ITEXT=

passnum

passnum

Specifies the pass (copy ply) to which the message 
text applies. The message is output to the operator 
just before processing of the indicated pass (copy 
ply) is begun. If no pass number is specified, the in-
dicated message is output at the beginning of the first 
pass.

OTEXT=
NONE

NONE
Specifies that no text message is output to the oper-
ator during job printing.
The default is NONE.

Y

Y

Y

OTEXT=

sc

sc

Specifies a text message of up to 80 characters 
(maximum of 400 characters per report).

OTEXT=

passnum

passnum

Specifies the pass (copy ply) to which the text ap-
plies. Multiple sc messages, one per pass-num, may 
be specified in a JSL. The message is output to the 
operator prior to the beginning of printing the speci-
fied report ply. If no pass number is specified, the text 
is output once at the beginning of printing the entire 
report.

Summary of Contents for XDL
































































































































































































































































Reviews: