Oce XDL, Reference Manual

Page: 81 / 255

Print Processing Summary of LINE Command Parameters
A29247-X4-X-8-7672
73
INKINDEX=
offset |
(offset[, init-val]
[, bit-opt]) Allows the user to specify a certain location in the in-
put record where an index to the ink to be used is
stored. It takes effect on the next logical page bound-
ary.
This option has the following components:
offset
Indicates the byte offset in the data record where the
ink index number is to be found.
init-val
Can be one of the following: ONE or ZERO. ONE
specifies that an index value of 1 is associated with
the first ink in the ink list. When the bit-opt parameter
is used, the init-val ONE parameter must also be
used. ZERO specifies that an index value of 0 is as-
sociated with the first ink in the ink list, an index value
of 1 is associated with the second ink in the ink list,
and so forth. The default is ONE.
bit-opt
A numeral having a value in the range of 1 through 7,
which specifies the number of low-order bits within
the ink index byte, which, in turn, specifies an index
value into the ink list of the current PDE. The default
value is 4.
If
init-val is ONE or is not specified, the value of the
ink index byte in the data record is a number in the
range 1 to
n , where n is the number of inks specified
in the PDE parameter (1 to 127). If ZERO is specified,
the ink index is a number in the range 0 to n, where n
is the number of inks specified in the PDE parameter
minus one (0 to 127). The ink index value must be
present in every record. If the INKINDEX in the data
record is greater than the number of inks specified,
the first ink in the list is used.
Y Y Y
INKINDEX=
NONE NONE
Specifies that there is no ink index.
The default is NONE.
Parameter Definition(s) Offline Online DJDE