Oce XDL, Reference Manual

Page: 68 / 255

Summary of ABNORMAL Command Parameters Print Processing
60
A29247-X4-X-8-7672
3.2 Summary of ABNORMAL Command Parameters
The ABNORMAL command allows you to restrict certain operator functions and define sys-
tem responses to error conditions.
ERROR This parameter specifies the required system response to abnormal
conditions detected in input processing or compiling DJDEs.
IMISMATCH This parameter specifies the action to take when a specified ink requires
a primary colour that is not currently loaded. The default is STOP.
ISUBSTITUTE This parameter specifies whether the operator is allowed to do an ink
substitution or not. The default is ANY.
OTEXT This parameter specifies that the system is to stop and display a WAIT
message when the recovery marker page is printed. This delay allows
the operator to verify the output report in the near vicinity of the marker
page. The default is NOWAIT, which means that the message is still dis-
played upon printing of the marker page, but printing does not stop.
Parameter Definition(s) Offline Online DJDE
ERROR=
CONTINUE CONTINUE
Displays the normal system message defining
the abnormal condition and continues process-
ing the report without applying the offending
DJDE parameter and without offering the opera-
tor the choice of continuing or aborting the job. Y Y N
ERROR=
ABORT ABORT
Displays the message for the abnormal condition
and aborts only the report it is processing (not
the entire job) without offering the operator the
choice of continuing or aborting the job.
ERROR=
STOP STOP
The default for this parameter and indicates that
the system stop processing the report and wait
for the operator to respond with a CONTINUE or
ABORT command.
The default is STOP.