manualshive.com logo in svg

Oce XDL, Reference Manual

Share
Download
Oce XDL Reference Manual Download Page 186

Page- and Record-oriented DJDEs

Dynamic Job Descriptor Entries (DJDEs)

178

A29247-X4-X-8-7672

INKINDEX=
offset |
(offset[, init-val]
 [, bit-opt])

Allows the user to specify a certain location in the input record where an index to 
the ink to be used is stored. It takes effect on the next logical page boundary.

offset

Indicates the byte offset in the data record where the ink index number is to be 
found.

init-val

Can be one of the following: ONE or ZERO. ONE specifies that an index value of 
1 is associated with the first ink in the ink list. When the bit-opt parameter is used, 
the init-val ONE parameter must also be used. ZERO specifies that an index val-
ue of 0 is associated with the first ink in the ink list, an index value of 1 is associ-
ated with the second ink in the ink list, and so forth. The default is ONE.

bit-opt

A numeral having a value in the range of 1 through 7, which specifies the number 
of low-order bits within the ink index byte, which, in turn, specifies an index value 
into the ink list of the current PDE. The default value is 4.

If 

init-val

 is ONE or is not specified, the value of the ink index byte in the data 

record is a number in the range 1 to 

n

, where 

n

 is the number of inks specified in 

the PDE parameter (1 to 127). If ZERO is specified, the ink index is a number in 
the range 0 to n, where n is the number of inks specified in the PDE parameter 
minus one (0 to 127). The ink index value must be present in every record. If the 
INKINDEX in the data record is greater than the number of inks specified, the first 
ink in the list is used. 

INKINDEX=
NONE

NONE
Specifies that there is no ink index.

The default is NONE.

ITEXT=
NONE

NONE
Specifies that no text message is output to the operator during input processing.

The default is NONE.

ITEXT=
(

sc

[,passnum])

sc

Specifies a text message of up to 80 characters.

passnum

Specifies the pass (copy ply) to which the message text applies. The message is 
output to the operator just before processing of the indicated pass (copy ply) is 
begun. If no pass number is specified, the indicated message is output at the be-
ginning of the first pass.

JDE=

jde-id

jde-id

Specifies the JDE to be used within the selected JDL at the next page boundary.

JDL=

jdl-id

jdl-id

The 

jdl-id

 specifies the name of the JDL to be invoked at the next page boundary.

DJDE

Definition(s)

Summary of Contents for XDL
































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands