Oce XDL Reference Manual Download

Page: 105 / 255

Print Processing

Summary of OUTPUT Command Parameters (Continuation)

A29247-X4-X-8-7672

OFFSET=
ALL

ALL
Results in an offset of each copy of each report.

Note:

For continuous feed printers the attached post

processing system must support this. Otherwise ALL
takes no effect.
The default is ALL.

OFFSET=
FIRST

FIRST
Specifies that an offset is to occur only on the first
copy of a report.

Note:

For continuous feed printers the attached post

processing system must support this. Otherwise
FIRST takes no effect.

OFFSET=
NONE

NONE
Specifies that there is to be no offset at any time.

PAPER-
SIZE=id

id
A3, A4, B4, B5,
USLEGAL, USLETTER
+ special LCDS papersize names used in V2.10 and
V2.00

PAPER-
SIZE=(x,y)

Variable papersize. Maximum is 33 inch.
Papersize cannot be changed in a job
If no papersize is defined, the default papersize is
used.
Use the same papersize for JSL and FRM.

Parameter

Definition(s)

Offline

Online

DJDE

Summary of Contents for XDL
































































































































































































































































Search results

Summary of Contents for XDL

Reviews:

Related manuals for XDL

Brands by name

Popular brands

Oce XDL, Reference Manual

Search results

Summary of Contents for XDL

Reviews:

Related manuals for XDL

Brands by name

Popular brands