Oce OP1018, Operation Manual

Page: 57 / 148

System Settings
ADVANCED OPERATION GUIDE 5-9
Adjusting Alarms
The following shows the various alarms and the available volume settings.
Item Available
Settings Description
Volume 0 Off
1 Minimum
2
3 Middle
4
5 Maximum Adjust the volume of the alarms. To make all alarm sounds inaudible,
select the
Off setting. The larger the setting value, the larger the
volume.
Key Conf. Buzzer Off
On Indicates that the machine has accepted the key operation that was
performed by the user.
Key Fail Buzzer Off
On Indicates that for some reason the machine is unable to accept the key
operation that was performed by the user.
Reset Buzzer Off
On Indicates that Reset/Power was pressed in order to reset the current
settings.
Job End Buzzer Off
On Indicates that a corresponding copy, print, or send job was completed
or that the machine has returned to an operation-ready state.
Ready Buzzer Off
On Indicates that the machine is in an operation-ready state.
Warning Buzzer Off
On Indicates that in its current state the machine is unable to perform the
corresponding job.
This setting applies when one of the following messages appears on
the display.
Close Document Processor.
Insert Cassette 1.
KPDL error. Job is ended.
Load Paper in Cassette1 (Cassette2, MP Tray, or Document
Processor).
Memory overflow. Part of the job end is printed.
Place original and press Start key.
Print overrun. This page isn’t complete.
Remove original from Document Processor.
Send error.
Toner low.