Oce OP1018, Operation Manual

Page: 111 / 148

Using COMMAND CENTER
ADVANCED OPERATION GUIDE 8-25
Advanced > Management > SNMP
The SNMP protocol is used for providing and transferring management information
within the network environment. Should an error occur such as
Add Paper , the
printing system can automatically generate a trap , an error message sent to up to
two pre-determined trap recipients.
Advanced > Management > LDAP
The FAX System can refer to the address book which is on the LDAP server as an
external address book and assign a fax number and e-mail address to the
destination.
Item Description
Read Community The read community can be used like a password. The default read community
name is
public . When a management application sends an SNMP request to read
a value, it must include the correct read community name or the request will be
rejected by the printing system.
Write Community Similar in function to the read community, but used in SNMP requests to write
(change) a value.
sysContact The MIB-II sysContact object, usually the e-mail address of the network
administrator.
sysName The MIB-II sysName object, usually the host or domain name of the printing
system.
sysLocation The MIB-II sysLocation object, usually the location information of the printing
system.
HP Web Jetadmin
Compatibility Turns HP Web Jetadmin Compatibility on or off.
Authentication Traps Check On to enable or Off to disable the MIB-II EnableAuthenTrap object. If
enabled, an SNMP trap is generated when an attempt to read or write is made
using an incorrect community name. The trap is sent to the configured trap
address.
Trap Community The SNMP trap community name to be used when the printing system generates
a trap.
Trap IP Address The IP address which will receive the trap.
Selected Errors Select the events which will cause a trap to be generated including Add Paper,
Low Toner, Add Toner, Cover Open, Paper Jam, and All Other Errors.
Item Description
LDAP Enables or disables access to the LDAP server.
LDAP Server Name Specifies a name or IP address for the LDAP server.
LDAP Port Number Specifies a port number for LDAP or use the LADP default port 389.
Search Timeout Specifies a period of time for searching the LDAP server.
Login User Name Specifies the user name to login to the LDAP server.
Login Password Specifies the password to login to the LDAP server.