Oce OP1018 Operation Manual Download Page 88

Page: 88 / 148

Using COMMAND CENTER

8-2

ADVANCED OPERATION GUIDE

Accessing COMMAND CENTER

Run the web browser.

In Address or Location, enter the machine IP address as the URL, e.g.

http://

10.183.51.33/

. The home page displays basic information about the machine and

COMMAND CENTER as well as the current status of the machine.

Select a category from the navigation bar on the left to view and set values for that
category.

When trying to access any screens other than the home page when a COMMAND
CENTER Admin password has been set, enter a user name and password.

The administrator password may be defined on the

Basic

page. If prompted to enter

User name and Password, any value may be entered for User Name (including
leaving it blank). For Password, enter COMMAND CENTER Admin password.

Summary of Contents for OP1018





















































































































































Search results

Summary of Contents for OP1018

Reviews:

Related manuals for OP1018

Brands by name

Popular brands

Oce OP1018, Operation Manual

Search results

Summary of Contents for OP1018

Reviews:

Related manuals for OP1018

Brands by name

Popular brands