Oce CS4236 User Manual Download | Manualshive

Page: 37 / 102

background image

With Océ Scanner agent you can:

■

View the scanner's status. Move the mouse over the scanner icon on the system tray.
Status messages include whether or not the scanner is detected, connection and runtime
errors and readiness for scanning.

■

View Error messages and logs.
Runtime errors are reported immediately on your screen.
You can also open the Status tab and Log tab for viewing error messages.

■

View information about the scanner device in relation to firmware and hardware revi-
sions. Open the Info tab.
· Install new firmware - You download new firmware to a folder on your machine.
Then right click on the scanner icon, select Advanced Options > Update Scanner
Firmware to install it on your scanner.
· Initiate a scan of the system's hardware bus for re-establishing the interface. Right
click on the scanner icon, select Advanced Options > Rescan Hardware Bus.
· Assign/reassign applications to the scanner's one-touch-scan buttons, or disable the
one-touch-scan buttons altogether. Open the One-Touch tab to make settings.
· Set up your scanner so it can be shared by user PC's on the network. Open the Scan
to Net tab to make settings. See also Installation - Share the scanner on the LAN.
· Set up your scan software so it can access shared scanners on the network. Open the
Scan to Net tab to make settings.
· Launch the scanner maintenance program. Right click on the scanner icon, select
Launch Scanner Maintenance.
· Launch the Océ Scanner agent on-line help. To find instructions on trouble shooting
and using Océ Scanner agent with your scanner.
Open Océ Scanner agent and press the F1 key.

Chapter 6 - Scan an original

37

Scan an original

«
...
35
36
37
38
39
...
»

Summary of Contents for CS4236







































































































Reviews:

No comments

Related manuals for CS4236

Brand: Uniden Pages: 203

Brand: Uniden Pages: 32

Brand: Uniden Pages: 132

Brand: Xerox Pages: 133

Brand: Nexa Pages: 3

Brand: Nexa Pages: 33

USB Color Flat Bed Scanner

Brand: Medion Pages: 24

Brand: Medion Pages: 28

Brand: Autel Pages: 85

Brand: Swegon Pages: 2

OpticFilm 8200i SE

Brand: Plustek Pages: 2

iNSIGHT 20 Plus

Brand: Scantronic Pages: 187

Brand: RCA Pages: 2

Wide Format Color Scanner

Brand: Lanier Pages: 2

Brand: Xerox Pages: 2

Travel Scanner 150

Brand: Xerox Pages: 2

Brand: NCR Pages: 6

imagePROGRAF L24e

Brand: Canon Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands