Oce CS2136 Reference Manual Download Page 36

Page: 36 / 57

Responding to Messages

Phenomenon

Cause

Corrective Action

Multisensor error.

Direct sunlight or strong lighting

may be shining on the printer

and causing the sensor to

malfunction.

Take steps to ensure the printer is

not used when exposed to direct

sunlight or strong lighting.

Maint cartridge problem.

An incompatible or used

Maintenance Cartridge

has

been installed.

Install a

Maintenance Cartridge

specified for use with the printer.
(→CD "Replacing the Maintenance

Cartridge")

Maint cart full.

The

Maintenance Cartridge

full.

After confirming that the printer

has stopped operating, replace the

Maintenance Cartridge

No maint cartridge

The

Maintenance Cartridge

not installed.

Install the

Maintenance Cartridge

(→CD "Replacing the Maintenance

Cartridge")

(→CD "Replacing the Maintenance

Cartridge")

No Maintenance Cartridge

capacity.

The Maintenance Cartridge

cannot absorb enough ink for

Printhead

cleaning.

After confirming that the printer

has stopped operating, replace the

Maintenance Cartridge

(→CD "Replacing the Maintenance

Cartridge")

Check maint cartridge

capacity.

The

Maintenance Cartridge

almost full.

You can continue printing. However,

prepare a new

Maintenance

Cartridge

Summary of Contents for CS2136


























































Search results

Summary of Contents for CS2136

Reviews:

Related manuals for CS2136

Brands by name

Popular brands

Oce CS2136, Reference Manual

Search results

Summary of Contents for CS2136

Reviews:

Related manuals for CS2136

Brands by name

Popular brands