Loading the Roll
Stopper
touches the roll. Lock the
Holder Stopper
lever (c) by pushing it down
toward the shaft side.
Important
•
Insert the
Holder Stopper
fi
rmly so that there is no gap between the roll and the
fl
ange of the stopper. If there is a gap, it may cause feeding problems.
Note
•
Remove any loaded paper that will not be used.
•
If the
Platen
is dirty, clean inside the
Top Cover
.
4
With the edge of the roll paper facing toward the printer, insert the
Roll Holder
shaft
(a) into the guide grooves (b) of the
Roll Holder Slot
on both sides.
Caution
•
Be careful not to drop a roll and hurt yourself when loading it.
•
Be careful not to put your
fi
ngers between the guide grooves (b) and the
Roll
Holder
shaft (a) when loading roll, or may hurt yourself.
9
