Safety Precautions
█
Cleaning the Printe
r
•
Use a damp cloth to clean the printer. Use a damp cloth to clean the printer. If such materials
come into contact with any electrical component inside the printer, a
fi
re or electric shock
may occur.
█
Pacemakers
•
This printer generates a low-level magnetic
fi
eld. Anyone wearing a pacemaker who
experiences discomfort while working around the printer should leave the area. Consult a
physician before continuing to work around the printer.
█
Printer location
•
Never install the printer on an unstable or vibrating surface. If it falls over, this could cause
personal injury.
•
Never set up the printer in a location that is exposed to high humidity or large amounts of dust,
or exposed to direct sunlight, high temperature, or open
fl
ame. This could cause a
fi
re or
electrical shock. Use the printer location in an environment where temperature and humidity
are within the ranges of 5 Degrees C to 35 Degrees C (41 Degrees F to 95 Degrees F) and 10
to 90% RH (with no condensation).
•
Never place the printer on a heavy wool or shag carpet. The
fi
bers may enter the printer
and cause a
fi
re.
•
Keep the area around the power outlet clear of items so that you can disconnect the power
cable immediately if the printer starts operating abnormally. n the event of a printer malfunction,
remove the power cable from the outlet as soon as possible to prevent
fi
re and electrical shocks.
•
Never install the printer near large of
fi
ce equipment or any other type of electrical device that
emits a strong magnetic
fi
eld. Never install the printer near large of
fi
ce equipment or any other
type of electrical device that emits a strong magnetic
fi
eld.
█
Moving the Printer
•
The weights of main printer units are as follows:
•
39 Kg
Moving the printer requires at least two people, one person on each side of the unit. Be careful
to avoid back strain and other injuries.
•
When moving the printer,
fi
rmly grasp the
Carrying handles
located on the bottom surface
at both sides. Holding the printer at other positions is dangerous and poses a risk of injury
and damage if the printer is dropped
3
