Oce CS172 FK-502, User Manual

Page: 309 / 514

Utility mode 11
CS172 11-11
Function Setting
Administrator Setting >> Fax Setting >> Function Setting
Turns ON/OFF transmission/reception functions. (page 11-43)
Item Description Available value
F
u
n
c
ti
on
ON
/O
FF
S
e
tt
in
g
F-Code
TX For details, refer to "Turning ON/OFF
transmission/reception functions" on
page 11-44. ON
*
/ OFF
Relay RX Broadcast the document received from
the originating station as an intermediate
relay station to the terminating station. To
use the Relay RX function, the Relay User
Box should be registered. ON
*
/ OFF
Relay Print Print the document received from the
originating station. ON / OFF*
Destina-
tion Check
Display
Function Set whether or not to display the list of
destinations specified at the time of fac-
simile transmission. ON / OFF
*
Memory RX The memory reception is the function
used to receive documents and store in
memory so that you can print them out
later as necessary. ON / OFF
*
Closed Network
RX The closed area reception is the function
used to receive the incoming data only
when the sender's password is valid. ON / OFF
*
Set a password in 4 digits.
Forward TX Set-
ting The Fax transfer is the function used to
transfer the received data to a certain sta-
tion determined in advance. OFF
*
/ Forward & Print / For-
ward & Print (If TX Fails)
Forward Dest.
Incomplete TX
Hold Documents which could not be transmit-
ted by the auto redial function because of
a communication error or busy remote
station is saved temporarily in the Re-TX
User Box. ON / OFF
*
When the Incomplete TX Hold
is set to ON, specify the Incom-
plete TX Hold Time.
PC-Fax RX Set-
ting The PC-Fax RX Setting feature offers a
procedure for saving files containing re-
ceived faxes in Boxes on the hard disk.
By setting to ON the PC-Fax RX Setting
function, you can set up whether or not to
print the data received and set up the
Communication Password. OFF
*
/ ON
Memory RX User Box / Speci-
fied User Box
Save & Print (ON / OFF*)
Communication Password (ON
/ OFF*)
TSI User Box Set-
ting This is a function to allocate received
originals according to the TSI information
of faxes received.
Or set up the action when receiving un-
registered TSI information. ON / OFF
*
Automatically Print*/ Memory
RX User Box
Receive & Print (ON / OFF*)