Oce CS171, User Manual

Page: 311 / 452

Loading copy paper 5
CS171P 5-27
5.3 Specifying finishing settings
If the optional finisher is installed, the machine can be set to finish the pages
after printing them.
The Finishing settings can be specified from the printer driver.
Stapling prints (Staple settings)
!
Detail
In order for the prints to be stapled, all of the following conditions must
be met.
The paper width must be between 182 mm and 297 mm
The paper length must be between 182 mm and 432 mm
When Finisher FS-603 is installed
Paper Weight Paper Size Loading Capacity (detected with ei-
ther measurement)
60 g/m
2
to 90 g/m
2
A4 w / v , B5 w / v 1,000 sheets 150 mm
A3 w , B4 w 500 sheets 75 mm
Number of Bound Pages Maximum Number of Sets
One place to-
wards the back One place to-
wards the front Two places
A4 w or
smaller
2 sheets 100 sets 40 sets 40 sets
3 to 5 sheets 80 sets 40 sets 40 sets
6 to 10 sheets 60 sets 40 sets 40 sets
11 to 20 sheets 30 sets 30 sets 30 sets
21 to 30 sheets 30 sets 30 sets 30 sets
31 to 50 sheets 30 sets/1,000
sheets 30 sets/1,000
sheets 30 sets/1,000
sheets
B4 w or
larger
2 sheets 100 sets 50 sets 50 sets
3 to 5 sheets 80 sets 40 sets 40 sets
6 to 10 sheets 40 sets 40 sets 40 sets
11 to 20 sheets 30 sets/1,000
sheets 30 sets/1,000
sheets 30 sets/1,000
sheets
21 to 25 sheets 30 sets/1,000
sheets 30 sets/1,000
sheets 30 sets/1,000
sheets