Oce CPS700, Maintenance Manual

Page: 25 / 132

The system maintenance 25
When to do
Add the toner when the toner icon on the system monitor changes into orange.
Note Attention Caution
Attention: If some toner is spilled, the key operator must follow the
instructions for the removal of the spilled toner (see Appendix A Safety
information).
How to add the toner
1
Open the toner cover.
2
Shake the toner bottle well.
3
Put the closed toner bottle upside down on the slider of the matching toner
reservoir.
Note: Every toner reservoir slider has special notches. The slide caps of the
toner bottles have notches that match with the notches of the sliders. This
makes sure that a toner colour can only be filled into the matching reservoir.
4
Open the slider of the toner reservoir. The slider of the toner reservoir also
opens the slide cap of the toner bottle.
5
Wait until the toner bottle is empty. Close the slider of the toner reservoir. The
slider of the toner reservoir also closes the slide cap of the toner bottle.
Note: Make sure that the toner reservoir is not opened longer than necessary.
Eventually the system stops printing.
6
Remove the toner bottle.
7
Close the toner cover.