Oce CPS700, Maintenance Manual

Page: 22 / 132

22 Océ CPS700 Configuration and maintenance manual
How to do the KOS adjustments
1
Select an adjustment.
2
The system creates a test job. The test job is sent to the job queue. The test job
prints automatically. Every test job contains three pages.
3
Get the first print from the receiving tray and put the print on the scanner. To
adjust the ’Image registration’ you must also fold the print. The screen displays
the following message.
[8] The screen for Image registration
[8] The screen for Image registration
4
The system scans and analyses the test print.
5
Repeat the steps 3 and 4 for the next test prints.
Note: The key operator must align the test print on the glass plate. If the test
print is not aligned, the system can not analyse the patterns on the test print.
Then the system asks you to reposition the print.