Oce CPS700, Maintenance Manual

Page: 32 / 132

32 Océ CPS700 Configuration and maintenance manual
Refill the fuser oil
Introduction
The key operator must access the KOM mode when the KOM warning icon on
the system monitor has changed into orange. The screen of the KOM mode
shows the message that the key operator must refill the fuser oil.
Before you begin
■
In case of preventive maintenance, the key operator must start KOM on the
operator panel. Press the keys for ’System manager’ -> ’System’ -> ’KOM’
on the operator panel.
In case of corrective maintenance, the error screen appears. Follow the
instructions on the screen.
■
Enter the KOM PIN code.
■
If required, select ’Fuser oil’. Press the key for ’Yes’. The system turns off
for maintenance.
Note Attention Caution
Attention: To prevent paper jams and damage to the imaging units, the key
operator must add a maximum of one bottle of fuser oil.
Caution:
Do not touch the other parts of the postfuser. These parts can be
hot.
General procedure
Attention: Take the actions in the described order.
1
Open the front door.
2
Refill the fuser oil.
3
Close the front door.