Oce CPS700, Maintenance Manual

Page: 17 / 132

The system configuration 17
Change the settings for ECO
’ECO’ ’Low power
mode’ To save energy, the key operator can
indicate the delay before the Océ CPS700
enters into the low power mode.
■
'Off'. The system does not enter the low
power mode.
■
Time. Use the arrow keys to define the
delay before the Océ CPS700 enters the
low power mode. The default value is 15
minutes.
Note: If the low power time is greater than
the sleep time, the Océ CPS700 goes
directly into the sleep mode.
’Sleep mode’ To save energy, the key operator can
indicate the delay before the Océ CPS700
enters the sleep mode. Use the arrow keys to
define the delay before the Océ CPS700
enters the sleep mode. The default value is
60 minutes.
Note: You can not turn off the sleep mode.
'Keep data in
ECO' If the Océ CPS700 enters the low power
mode, the image process unit is turned off to
save more energy. This causes the loss of all
jobs in the job queue and the local mailbox.
The key operator can select the following.
'Yes'. All jobs remain in the local mailbox
and job queue.
'No'. All jobs are removed from the local
mailbox and job queue.