74
Chapter 5 Error Conditions, Problems, and Solutions
Clear Paper Jams
Jam in the Trim Area
[35]
Step
Action
Information
1
Remove the trim bin.
2
Loosen the 2 orange plastic
hand screws to release the
locking plates.
The locking plates can rotate to
release the trim stop guard.
3
Pull the trim stop guard
towards you.
4
Remove the jammed book.
Check the trim stop and remove
any pieces of trimmed paper.
5
Push the trim stop guard into
position.
6
Hold the locking plates in
position and tighten the orange
hand screws.
7
Attach the trim bin.
8
Touch START, then touch
ADVANCED > PURGE SET
> PURGE SET.
This action clears any other paper
from the Booklet maker.
9
Continue the print job.
Summary of Contents for BLM 500
