manualshive.com logo in svg

Oce BLM 500, Operating Information Manual

The Oce BLM 500 Operating Information Manual is a comprehensive manual that provides users with detailed instructions on how to operate and maintain the Oce BLM 500 product efficiently. You can easily download this manual for free from our website, manualshive.com, to ensure the optimal performance of your device.

Share
Download
background image

101

Clean excess grease from the Stitch Head

Clean excess grease from the Stitch Head

Introduction

Follow this procedure if there are grease marks around the stitches on the book.

[58] 

Required tool

Lint free cloth

Procedure

[55] 

Step

Action

Information

1

On the user interface, touch 
ADVANCED > STITCHER 
UP > STITCHER UP

The folder cover must be closed. 
This action moves the stitch head to 
the correct position for lubrication.

2

Open the folder cover.

Open and Close the Folder Cover 
on page 37

3

Lift the clincher frame.

Lift and Lower the Clincher Frame 
on page 38

4

Clean grease from the sides of 
the stitch head.

[59] 

5

Lower the clincher frame.

6

Close the folder cover.

Summary of Contents for BLM 500























































































































Reviews:

No comments

Related manuals for BLM 500

Brands by name

Popular brands

Load more brands