![background image](http://html1.mh-extra.com/html/oce/blm-500/blm-500_operating-information-manual_722584100.webp)
100
Chapter 6 Maintenance
Clean the Trimmings Removal Fingers
[53]
Procedure
[54]
A
Trimmings removal fingers
B
Drive end of the conveyor shaft
Step
Action
Information
1
Turn off the Booklet maker
2
Lift the Booklet maker main
deck.
The procedure can be seen from the
top of the machine. Access to the
parts is through the former-clamp
mechanism.
3
Remove the trim bin.
4
Clean the visible
trimmings-removal fingers
with an alcohol wipe.
5
Rotate the conveyor shaft by
half a turn.
1. Hold the shaft and push to the
right, against the spring pressure to
disengage the shaft from the drive
pin.
[57]
2. Rotate the shaft by half a turn.
3. Align the shaft with the drive pin
and release.
6
Clean the visible
trimmings-removal fingers
with an alcohol wipe.
7
Install the trim bin.
8
Close the Booklet maker.
1
2
3
Summary of Contents for BLM 500
