39
Lift and Lower the Clincher Frame
Lift the Clincher Frame
1.
Open the folder cover.
2.
Turn the locking handle to the left
, until the thread is disengaged.
3.
Lift the clincher frame to the vertical position.
Lower the Clincher Frame
Attention:
You must hold the weight of the clincher frame. Do not let the
clincher frame fall on your hand.
1.
Lower the clincher frame.
2.
Turn the locking handle to the right
, until the handle is tight.
3.
Check that the locking handle will not be hit by the folder cover when you close the
folder cover. The locking handle should point towards the middle of the machine. If
necessary, lift and rotate the locking handle to a new position.
Summary of Contents for BLM 500
