45 | DE
Mounting instructions isCon
®
lightning protection system
Installing the isCon® system
Fig 46:
Fastening the air-termination rod in the air-termination rod stand
2. Tighten the clamp clip, thus fixing the air-termination rod.
Air-termination rod with external isCon
®
conductor
Fig 47:
Fixing the air-termination rod in the air-termination rod stand
1. Insert the air-termination rod into the air-termination rod stand from
above.
2. Tighten the clamp clip, thus fixing the air-termination rod.
3. In addition, fasten the isCon
®
conductor to the air-termination rod
stand using strip clips (cable ties), whilst maintaining the minimum
bend radius (see Tab. 2 on page 11) of the isCon
®
conductor to the
ground.
