36 | DE
OBO Bettermann
Installing the isCon® system
Assembling the air-termination rod
Note!
Before assembling the air-termination rod, the isCon conductor must
be prepared in the manner described in “7.1 Preparing the isCon
®
con-
ductor” on page 30 and an internal connection element mounted as
described in “7.2 Mounting isCon connection elements” on page 32.
Fig 28:
Pushing the isCon
®
conductor through the air-termination rod
1. Lay all three parts of the air-termination rod on the ground.
2. From below, run the isCon
®
conductor through the retaining rod and
the central rod.
Fig 29:
Screwing the air-termination rod to the connection element
3. Fix the connection element with a fork wrench (WAF 19 mm) and
screw the air-termination rod tight to the connection element.
