Operating & Maintaining the Connex500/350 3-D Printer
7–36
DOC-13000 Rev. E
7. When
the
following
screen
appears,
clean
the
heads.
Figure 7-50: Clean print heads screen
8. Place
the
mirror
on
the
build
tray.
9. Put
on
the
cleaning
gloves.
10. Soak
the
cleaning
cloth
with
the
cleaning
fluid
(alcohol).
11. Clean
the
orifice
plates,
with
a
back
‐
and
‐
forth
motion.
Figure 7-51: Cleaning the print heads
Use
the
mirror
to
make
sure
that
you
have
removed
all
of
the
residue
material.
12. When
the
heads
are
clean,
select
the
confirmation
check
box
in
the
wizard
screen
and
click
Next
.
13. Remove
the
cleaning
materials
from
the
printer,
and
close
the
cover.
14. Select
the
confirmation
check
box
in
the
wizard
screen
and
click
Next
.
WARNING:
The print head orifice plates (bottom surface) may be hot.
Do not touch them with your bare hands, and proceed with caution.
All manuals and user guides at all-guides.com
all-guides.com
