Operating & Maintaining the Connex500/350 3-D Printer
7–20
DOC-13000 Rev. E
5. When
the
following
screen
appears,
open
the
cover.
Figure 7-20: Head cleaning wizard—steps 5–10
6. Place
the
mirror
on
the
build
tray.
7. Put
on
the
gloves.
8. Soak
the
cleaning
cloth
with
the
cleaning
fluid.
9. Clean
the
orifice
plates,
with
a
back
‐
and
‐
forth
motion
(see
figure 7
‐
21).
Use
the
mirror
to
make
sure
that
you
have
removed
all
of
the
residue
material.
Figure 7-21: Cleaning the heads
10. When
you
have
finished
cleaning,
select
the
confirmation
check
box
in
the
wizard
screen
(see
figure 7
‐
20)
and
click
Next
.
WARNING:
The print head orifice plates (bottom surface) may be hot.
Do not touch them with your bare hands, and proceed with caution.
It is recommended that you use this opportunity to also clean the roller and
the UV-lamp lens (to the right of the print heads).
All manuals and user guides at all-guides.com
