Nuvico EasyNet ED-P1600, Installation Manual

Page: 131 / 136

131
SETUP MENU
Using Mouse
Click on the different parameters and click to change its value. When finished, make sure that
you save the settings by clicking on [Save].
Using Front Panel/Remote
First, use buttons to highlight different parameters on the screen. Then, press
↵
button to modify or to get into the sub-menu to change its parameter. When finished, make sure
that you save the settings by highlighting [Save] and press the
↵
button.
NTP
If an NTP server is available for time sync, enter the appropriate values.
NTP Server: Enable this setting if you would like to sync the DVR to the NTP Server and test the connection.
Private NTP1: Set IP address of the NTP server if the time server is present in your local network.
Private NTP2: Set IP address of the NTP server if the time server is present in your local network.
Private NTP3- Set IP address of the NTP server if the time server is present in your local network.
Sync Interval: Set the time interval for synchronization.
Time Server: If you would like the DVR to act as a time server for other EasyNet™ DVR(s), set it to On.
NTP Status: The Sync Status displays the last time the DVR was synchronized with the time server.