Nuvico EasyNet ED-P1600, Installation Manual

Page: 128 / 136

128
SETUP MENU
Using Mouse
Click on the different parameters and click to change its value. When finished, make sure that
you save the settings by clicking on [Save].
Using Front Panel/Remote
First, use buttons to highlight different parameters on the screen. Then, press
↵
button to modify or to get into the sub-menu to change its parameter. When finished, make sure
that you save the settings by highlighting [Save] and press the
↵
button.
IP FILTER
Should want to prohibit or allow only certain IP address or IP address range to be accessing this DVR, you can configure
those setting here.
USE: Enable or disable if you would like to use this feature.
Not Used: This function is disabled.
Allow: Allows networking from the STAT IP to END IP.
Deny: Denies networking from the STAT IP to END IP.
Start IP: Specify the start range of the IP address.
End IP: Specify the ending range of the IP address.