manualshive.com logo in svg

Nuova Simonelli microbar ii, Service Manual

Share
Download
Nuova Simonelli microbar ii Service Manual Download Page 20

2.1.9 

ACCESSORIES BOX

The accessories box supplied with the machine 
contains a cleaning brush, decaf measuring cup, 
milk temperature adjustment screw, an Allen key for 
grinder adjustment, coffee machines keys, button 
labels and product sample for cleaning the milk and 
coffee circuits.

NOTE

When installing the machine for the first time or 
after water heater unit maintenance, press the 
button to dispense hot water before dispensing any 
coffee. Repeat this operation as required and until 
there is an even flow of water from the nozzle.

To switch off the machine, proceed as follows:

ȗ

 Hold 

the   key down for 5 seconds with the 

machine switched on.

ȗ

 

The display will read "Machine Off".

ȗ

 

To switch the machine off fully, press the main 
switch and turn it to the “OFF” position (LED 
OFF).

Edition 00 to 01/2018

2.6

 

 

SERVICE MANUAL

Machine Off

Day        Hour

Summary of Contents for microbar ii













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands