Nuova Simonelli microbar ii Service Manual Download Page 101

Page: 101 / 172

12.3.6

ON/OFF PROGRAM.

From the service engineer mode menu, press

the

key to select "PROGRAM. ON-OFF" and

press ENTER

key to open the sub-menu.

This setting allow to set the automatic switch-
ing ON/OFF of the machine.

NOTE

The default setting for the machine has all days
of the week set to "STANDBY" and therefore, to
switch the machine on/off, the main switch must
be used.

Use

the -

keys to select the day to set

and press

key to enter the setting.

NOTE

After SATURDAY, press

keys to return to the

previous menu.

Use

the -

keys to increase or decrease

the time or to change the day.

Press key to pass to the next setting, or

press

to return to previous menu.

Edition 00 to 01/2018

12.11

SERVICE MANUAL

Program ON-OFF

Sunday
Day OFF

Sunday
ON07:30 OFF23:30

Summary of Contents for microbar ii













































































































































































Search results

Summary of Contents for microbar ii

Reviews:

Brands by name

Popular brands

Nuova Simonelli microbar ii, Service Manual

Search results

Summary of Contents for microbar ii

Reviews:

Brands by name

Popular brands