DSP LASER AP with MCS
10.
System Characteristics and Installation
MCS with DSP LASER AP is high safety level system. It is however essential that it is
correctly installed and used according the following instructions.
10.1. Standard supply
MCS with DSP LASER AP consists in the following elements:
•
DSP LASER AP-TX
•
DSP LASER AP-RX
•
MCS
•
Tool for test and positioning of TX-RX
•
Copy of this instruction manual
10.2. Transport and unpackaging
MCS with DSP LASER AP is provided into a proper package of rigid cardboard and with
weight of 6 Kg. Weight and small dimension do not cause particular problems nor risks both
for the transport and the unpackaging operations.
Caution:
The elements constituting the package must not be dispersed in the
environment. Contact the specialized collection centres, equipped for the
disposal in respect of the nature and the laws in force.
Caution:
Check, by sight, the presence and the integrity of all the components
constituting the device, making sure that no evident damage has been
suffered during the transport. If this is not the case, do not use the device
and contact NUOVA ELETTRONICA.
10.3. Mechanical installation
10.3.1. MCS module
MCS module is designed to be placed inside the electric panel of the press brake.
Warning
:
MCS module must be installed inside an electrical panel with minimum
protection rating IP 54.
28
DLAM01EN
Summary of Contents for DSP LASER AP
Page 2: ......
Page 4: ......
Page 50: ...DSP LASER AP with MCS Figure 34 44 DLAM01EN...
