OPERATOR & MAINTENANCE MANUAL
7
Under no circumstances are any guards, panels or insulating materials to be tampered
with.
Do not leave any flammable liquids or materials near the generator or any other parts
of the electrical installation.
Take extreme caution to avoid risks of electrocution. Ensure that all earthing
installations have been fitted according to the regulations.
Ensure all connections and wires are insulated. Do not leave any terminals of the
generator unprotected.
Ensure all connection points and their accessories have been correctly earthed.
Verify and ensure that all electrical power connections and auxiliary service
connections are correct.
Check that the phase rotation matches the power supply.
Ensure the correct ventilation of the premises so that all exhaust gases are released to
the atmosphere and verify that they are in a safe position away from all doors, windows
and air intakes.
Make sure there are no leaks in the oil and fuel pipes.
Never stand under or close to any object that is being hoisted or lifted into position.
2.4 Safety During Operation
Only adequately trained and competent personnel are to access the operating area of
the generator.
Always wear ear protection when the generator is in operation.
Before operating the generator, ensure that the earth spike is connected to the earth
point at the front of the plant.
Before starting the engine, turn off any connected loads and switch all circuit breakers
to the “OFF” position.
Do not operate the generator in any poorly ventilated areas.
Do not handle any wires or connections when the generator is operating.
Do not touch any rotating machinery.
Do not move the generator when it is operating.
Do not connect or disconnect loads whilst the generator is operating. High voltage is
present whenever the engine is running. Loads should be connected correctly before
starting the engine.
Do not smoke near the generator during operation or close to any fuel sources.
Do not point the exhaust towards people or buildings.
Use the emergency stop button only in an actual emergency. Do not restart the
engine until the problem has been corrected and verified.