OPERATOR & MAINTENANCE MANUAL
11
3. Specifications and Parts Introduction
3.1 Specifications
3.1.1 Use
The generator can be used as a power supply for two main types of service.
①
Continuous service: Used for the production of electrical energy for several purposes:
motion force, lighting, heating, etc.
②
Emergency service: Used to rectify main supply interruptions or to face consumption
peaks.
3.1.2 Main Specifications
Reliable and powerful Perkins engine and Stamford alternator.
Operation: Uses the advanced control module-DEIF-PLC-1F, for convenience and
ease of operation via PC or front control panel. In addition, it will perform automatic
shutdowns on fault signals. Compatible with ATS systems.
55℃ cooling system.
Engine and alternator has rubber mounts installed to reduce vibration.
High anti-corrosion performance.
Easy maintenance: Wide doors are designed to allow easy access for maintenance
and cleaning.
Super quiet performance: Oversized muffler and acoustic insulation installed inside all
panels and doors to minimize noise.
3.1.3 Ambient Condition
Installation: Indoors and outdoors in a well ventilated area.
Temperature: -15℃ to 50℃
Humidity: Less than 80%
Altitude: Less than one thousand (1000) metres above sea level.
3.2 Generator Specifications
Item
Unit
Data
Generator
Model
S150PS
Rated Output
kVA
150
kW
120
