Section 8
Service (Hood)
Cocoon Aqua IR Hydration Pro System
28
SECTION 8: SERVICE (HOOD)
8.1 Removing the Hood Cover
Required tools: crosshead screwdriver
Remove 2 screws and pull the cover in the direction of the arrow.
8.2 Removing the Hood and Changing the Strut Nut
Required tools: wrench 10mm, 13mm, and two people
Removal:
a. Remove panels and hood cover.
b. Disconnect electrical wires.
c. Open capsule and unscrew strut nuts.
d. If you are changing the struts, install new instead of old.
e. For hood removal, close capsule and remove hinge pins using punch and
hammer.
Installation:
a. Install hinge pins.
b. Open capsule and connect struts.
c.
Close hood and connect water and electrical wires.
Name
Part Number
Strut
E4000-28
Hinge
