Section 7
Operation
Cocoon Aqua IR Hydration Pro System
25
a.
AUDIO
(speaker ON/OFF)
b.
BRIGHTNESS (
of LCD display)
c.
FACE AIR
(10 levels)
d.
COLOR LIGHTS
(red, blue, green, turquoise, violet, yellow)
Manual control
e.
VIBRATION INTENSITY
f.
STEAM
(ON/OFF) (available in Custom programs only)
g.
TEMPERATURE
(between 25
o
C [77
o
F] and 48
o
C [118
o
F])
a. Audio
Activate the
Audio
function on the LCD display by pressing the motion buttons (
UP,
DOWN, LEFT, RIGHT
) and make your selection by pressing the
ENTER
button (see
Figure 7).
From the Audio submenu, make your choices and confirm your selection by pressing
ENTER.
NOTE:
Your selections must be confirmed by pressing
ENTER
. If you press
ESCAPE
only, the
default settings will be restored.
b. Temperature:
To select the desirable steam sauna temperature, activate the
Temperature
field and
press
ENTER
. Press the
LEFT
button to reduce the set temperature and press the
RIGHT
button to increase the set temperature.
Press
ESCAPE
to get back to the Program Menu.
CAUTION:
When using Radiant Heat, be sure to refrain from touching the upper portion of the
inside of the cabinet. The radiant heat emitters are located in this area and become very hot
when the Radiant Heat feature is in use. Make sure that the chest is always a minimum of four
inches from the radiant heat emitters.
c. Vibratory Bed:
To turn on vibration, simply activate the vibration function field and press
ENTER
.
To control intensity in this mode, choose the
SPEED
control from the Vibratory Bed
submenu and simply press the
LEFT
or
RIGHT
buttons until your desired level is
reached. Confirm your selections by pressing
ENTER
.
To turn
OFF
vibration in either mode, choose
OFF
from the Vibratory Bed submenu.
Confirm your selection by pressing
ENTER
.
d. Face Air:
To turn on the fan, highlight the
Face Air
function field and press
ENTER
.
To control intensity in this mode, press
LEFT
or
RIGHT
buttons in the Face Air submenu
until your desired level is reached. Confirm your selections by pressing
ENTER
.
NOTE:
Your selections must be confirmed by pressing
ENTER
. If you press
ESCAPE
only, the
default settings will be restored.
