NuAge Beauty COCOON AQUA IR HYDRATION PRO, Owner'S Manual

Page: 27 / 63

Section 7 Operation
Cocoon Aqua IR Hydration Pro System 23
7.4
Initial or Automatic “
Warm-Up
”
Session

Select the Warm-Up program with the motion buttons ( UP, DOWN, LEFT, RIGHT ) until Warm-
Up is highlighted. Confirm your selection by pressing ENTER (see Figure 7).

The Cocoon Aqua IR Hydration Pro System automatically warms up the unit within 5 minutes.
The timer will count down until the Warm-Up session is finished. Once the Warm-Up session is
finished, the Welcome Screen will be displayed on the LCD screen followed by a beep.

From the Welcome Screen press ENT to go to the main menu.

To cancel the Warm-Up program at any time press the ESCAPE button (see Figure 7) and
follow the instructions from the LCD screen or lift the hood.
7.5 Working with the Options
Set the “Settings”:

Move with the motion buttons until the Settings box is highlighted and confirm your selection
with the ENTER button (see Figure 8).

From the Settings submenu, verify that all settings are correct and make any necessary
corrections. The submenu will allow you to verify/change the following setting parameters:

Version of program V XXXX*

Version of program V XXXX*

Machine type Cocoon Aqua IR Hydration Pro

Temperature Celsius (Celsius/Fahrenheit)

Control Local (Local / Ethernet)

Brightness

Audio
*XXXX represents the version of your machine.

To move up/down in the submenu, use the UP or DOWN buttons (see Figure 7). To select
different settings use the LEFT or RIGHT buttons.

Verify that all settings are correct and set your selections with the ENTER button. The
Cocoon Aqua IR Hydration Pro System will automatically save all of your settings into the
memory.

“Service” Submenu:

Move with the motion buttons until the Service box is highlighted and confirm your selection
with the ENTER button (see Figure 7).

From the Settings submenu, verify that all settings are correct and make any necessary
corrections. The submenu will allow you to verify/change the following setting parameters:

Vibratory bed OFF (ON / OFF)

Drainage OFF (ON / OFF)

Open liquid concentrate OFF (ON / OFF)

Total time 000,00