Section 6
Installation
Cocoon Aqua IR Hydration Pro System
9
SECTION 6: INSTALLATION
Installation Steps (see the following detailed instructions per step):
6.1 Remove Side Panels
6.2 Install the Hood
6.3 Adjust the Legs
6.4 Connect Electrical Supply (to be done by qualified/certified/licensed electrician only)
6.5 Reattach Side Panels
6.6 Install Hood Cover
NOTE:
For reference, the use of
“left”
and
“right”
when referring to the machine will be done
as if one is in the unit.
6.1 Removing Side Panels
Before any repair and/or inspection of the unit, the electrical supply must be shut off.
Before removing the side panel of the unit, shut off the electrical supply to the unit.
Tools/Supplies required: Phillips Head screwdriver, flat head screwdriver, 2 people
Removal (remove the right side panel first):
a. Use a small flat head screwdriver to gently remove the white plastic caps over
the 10 screws. There are 3 on each end and 2 on each side.
b. Use the Phillips Head screwdriver to remove the 10 screws.
c.
While another person slightly lifts the front of the machine, carefully remove the
right side panel by gently pulling down and outward on the right panel.
d)
Remove the left panel in the same manner.
6.2 Installing the Hood
Tools/Supplies required: 13mm wrench, 10mm wrench, 8mm wrench, 5 wire ties, Wire snips
