Section 7
Operation
Cocoon Aqua IR Hydration Pro System
21
SECTION 7: OPERATION
7.1 The Control Panel(s)
The control panel, which is mounted under the LCD screen (for the user), is used to operate the
Cocoon Aqua IR Hydration Pro System. Pressing a membrane keypad on the panel enters
commands. The LCD screen shows the status of the operations being performed.
Control Panel
1. Up
2. Right
3. Down
4. Left
5. Escape (no)
6. Enter (yes)
7.2 Preparation for Operation
1. Turn on the unit using the ON/OFF switch and activate it by following the instructions on the
LCD Display. T
he Screen should display “
FILL TANK WITH DISTILLED WATER
”.
2. Ensure that a container is located under the drain hose at the foot end of the unit to catch
excess condensation.
3. WATER USE: Only distilled water is to be used in the system. Purified drinking water or
deionized water are not acceptable alternatives.
4. Each morning you will fill the unit with approximately 3.5 Liters of distilled water with the
canopy closed. No measuring of water is necessary. Simply pour the distilled water into the
water reservoir
of the unit until you here a beep and the message on the screen reads “Tank
is Full.”
7.3 Automatic Warm-Up Functions
:
Cocoon Aqua IR Hydration Pro
’s pre
-programmed Warm-Up functions prepare the steam
generator and radiant heat in the capsule for each use
.
These features prepare the system for
1
2
3
4
5
6
Figure 7
