Section 8
Service (Hood)
Cocoon Aqua IR Hydration Pro System
33
Face Fan
Required tools: crosshead screwdriver
Remove the connector “FAN” from the “LCDrx” PCB.
Remove four (4) screws that hold the fan in position.
LCD Panel
Required tools: crosshead screwdriver, knife, silicon glue
Removal:
a. Remove all connector
s from the “LCDrx” PCB.
b.
Remove two screws from the “LCDrx” PCB and take off “LCDrx” PCB.
c. Cut glue in edges of LCD panel.
d. Remove two screws from LCD mounting bracket and carefully remove LCD
display from housing.
Installation:
a. Put LCD panel into position and put some glue drops at the bottom corners.
b. Install the two (2) screws into the LCD mounting bracket.
c.
Put “LCDrx” PCB into position and install two (2) screws.
d. Install all connections.
NOTE
: There is no difference between control panel 1 and control panel 2 (connections KBD1
and KBD2).
Upper Control Panel
Required tools: crosshead screwdriver
Removal:
a.
Remove “LCDrx” PCB.
b. Remove 2 screws from the control panel.
Installation:
a. Install two (2) screws in the control panel.
b.
Install the “LCDrx” PCB and fasten all connectors.
