NTT docomo FOMA L601i, Manual

Page: 226 / 413

222
Entering
Characters
Entering Characters
List of Character Assignment of Dial Buttons
You can enter a character by pressing dial button. On pressing each button, you can enter multiple characters as follow the
table below. Each time you press the button, the character will be changed. Each time you press
#
, the character will be
changed in reverse order.
1: In full-pitch mode, “ ” or “ ” is displayed only when the character to which “ ” or “ ” can be added is displayed.
2: You can enter a character only in full-pitch mode. 3: In half-pitch mode, “ ~ ” is displayed. 4: You can enter a character only in half-pitch mode.
5: If you set capital mode in “Switching Capital/Small letter mode” (P219), the capital letter will be displayed at first.