NTT docomo FOMA D703i, User Manual

Page: 416 / 440

11
7 Check that
最適化を行う
is selected and
click 次へ
･
This screen is not displayed if optimization has
already been performed.
8 Check the settings and click 完了
9
Click
OK
The PC must be rebooted for the changes to take
effect. Click
はい
when a window prompts you to
reboot the PC.
･
If optimization of W-TCP setting has already
been performed, rebooting is not required.
･
Performing communication
☛
P12
Setting 64K data communication by easy setup
Before setup, make sure that FOMA terminal and
the PC are properly connected.
☛
P4
･
Using other providers
☛
P12
For Windows XP
1 Perform Steps 1 to 3 of “Using mopera U /
mopera” of “Setting packet
communication by easy setup”
☛
P8
･
Select
64K
データ通信 (64K data communication)
in Step 2 for the connection procedure.
･
Select
『
mopera U
』への接続
(connecting to
“mopera U”) or 『
mopera
』への接続 (connecting to
“mopera”) in Step 3.
2
Set any connection name and each item
z
Click
次へ
･
The following one-byte characters cannot be
entered:
￥ / : ＊ ? ! <> ｜
･
Check that
FOMA D703i
is set for
モデムの選
択
(Modem selection).
･
Select if caller ID is notified at dialup
connection. Select
発信者番号通知を行う
(Caller ID Notification on) for mopera U and
mopera connection.
3 Set each item
z
Click 次へ
･
The entry for
ユーザー名
or
パスワード
is not
required for connecting.
･
If you select
すべてのユーザー
for
使用可能
ユーザーの選択
, all users that are allowed to
logon to Windows can access the connection.
Using mopera U / mopera
Example
Next
▲
E03 Manual for Data Commu.fm 11 ページ ２００６年１２月２０日 水曜日 午後５時４９分